Laser cutting is a high-precision metal fabrication technique widely used for sheet metal and fabricated parts. By focusing a powerful laser beam, it cleanly and accurately melts or vaporizes the material, creating intricate shapes and precise cuts. This non-contact process results in minimal heat distortion and a fine, smooth edge finish, making it suitable for diverse materials like steel, aluminum, and more. With its exceptional precision and speed, laser cutting is a preferred method in industries such as manufacturing, electronics, and aerospace for custom parts like sheet metal parts, Stamping parts, etc.

A) General Part Information

Part Number:-

- Part Number which is usually mentioned on the drawing. (Alphanumeric values are accepted).

Part Description:-

- Part Name, Wire Trim, Wire Harness Casing, etc. (Alphanumeric values are accepted).

B) Volume (Number of Pieces Produced)

Annual Volume:-

- The Number of Pieces that are Required in a Year. (Limit set for the tool: 1 - 10000000 Nos).

Lot Run Size:-

- The Number of Pieces to be Processed in a Single Setup
(Note: - Suggested value in Input box is Avg. monthly lot run Size. If you want to change simply override this value.) (Limit set for the tool: Less than or equal to Annual volume).

C) Minimum required input

Material Thickness(In):-

- Enter the thickness of the part.(Limit set for the tool is 0.02 - 1.00 (inch))

Length of Part:-

- Enter the maximum length of the part.(Limit set for the tool is 0.04 - 95.9 (inch))

Width of Part:-

- Enter the maximum width of the part.(Limit set for the tool is 0.04 - 35.9 (inch))

Cut Length:-

- Enter the cutting length of the part.(Limit set for the tool is 0.18 - 400 (inch))

Pierces:-

- Enter the number of pierces required for the part.(Limit set for the tool is 1 - 100)

Part Net Weight:-

- Enter the net weight of the part.(Limit set for the tool is 0.1 - 2000 (Lbs.))

Laser Cutting (CO2)

Laser Cutting (CO2) Costing Tool

Part Number:-

- Part Number which is usually mentioned on the drawing. (Alphanumeric values are accepted).

Part Description:-

- Part Name, Wire Trim, Wire Harness Casing, etc. (Alphanumeric values are accepted).

Annual Volume:-

- The Number of Pieces that are Required in a Year. (Limit set for the tool: 1 - 10000000 Nos).

Lot Run Size:-

- The Number of Pieces to be Processed in a Single Setup
(Note: - Suggested value in Input box is Avg. monthly lot run Size. If you want to change simply override this value.) (Limit set for the tool: Less than or equal to Annual volume).

Material Thickness(In):-

- Enter the thickness of the part.(Limit set for the tool is 0.02 - 1.00 (inch))

Length of Part:-

- Enter the maximum length of the part.(Limit set for the tool is 0.04 - 95.9 (inch))

Width of Part:-

- Enter the maximum width of the part.(Limit set for the tool is 0.04 - 35.9 (inch))

Cut Length:-

- Enter the cutting length of the part.(Limit set for the tool is 0.18 - 400 (inch))

Pierces:-

- Enter the number of pierces required for the part.(Limit set for the tool is 1 - 100)

Part Net Weight:-

- Enter the net weight of the part.(Limit set for the tool is 0.1 - 2000 (Lbs.))

Laser Cutting (CO2)

Laser Cutting (CO2) Costing Tool

Part Number:-

- Part Number which is usually mentioned on the drawing. (Alphanumeric values are accepted).

Part Description:-

- Part Name, Wire Trim, Wire Harness Casing, etc. (Alphanumeric values are accepted).

Annual Volume:-

- The Number of Pieces that are Required in a Year. (Limit set for the tool: 1 - 10000000 Nos).

Lot Run Size:-

- The Number of Pieces to be Processed in a Single Setup (Note: - Suggested value in Input box is Avg. monthly lot run Size. If you want to change simply override this value.) (Limit set for the tool: Less than or equal to Annual volume).

Material Thickness(In):-

- Enter the thickness of the part.(Limit set for the tool is 0.02 - 1.00 (inch))

Length of Part:-

- Enter the maximum length of the part.(Limit set for the tool is 0.04 - 95.9 (inch))

Width of Part:-

- Enter the maximum width of the part.(Limit set for the tool is 0.04 - 35.9 (inch))

Cut Length:-

- Enter the cutting length of the part.(Limit set for the tool is 0.18 - 400 (inch))

Pierces:-

- Enter the number of pierces required for the part.(Limit set for the tool is 1 - 100)

Part Net Weight:-

- Enter the net weight of the part.(Limit set for the tool is 0.1 - 2000 (Lbs.))

- The Number of Pieces to be Processed in a Single Setup
(Note: - Suggested value in Input box is Avg. monthly lot run Size. If you want to change simply override this value.) (Limit set for the tool: Less than or equal to Annual volume).