E-coat

A) General Part Information

Part Number:-
- Part Number which is usually mentioned on the drawing. (Alphanumeric values are accepted).
Part Description:-
- Enter Part Name example Bumper, Cover, Upper body, etc.(Alphanumeric values are accepted).

B) Volume (Number of Pieces Produced)

Annual Volume:-
- The Number of Pieces that are Required in a Year. (Limit set for the tool : 1- 10000000 Nos).
Lot Run Size:-
- The Number of Pieces to be Processed in a Single Setup. (Number of units should be equal to or Less than Annual volume).

C) Part Dimensional Information

Envelop Length (mm):-
- Enter the Longest Side Envelop length of the part. (Limit set for the tool : 50 mm - 3638 mm).
Envelop Width (mm):-
- Enter the Maximum width, Envelope width of the part. (Limit set for the tool : 50 mm - 1809 mm).
Envelop Height (mm):-
- Enter the Height, Envelope height of the part. (Limit set for the tool : 5 mm - 1809 mm).
Thickness of Part (mm):-
- Enter the Thickness of the Part. (Limit set for the tool : 0.5 mm - 127 mm).
Surface Area (Sq cm):-
- Enter the Surface Area that needs to be coated. (Limit set for the tool : 5 Sq cm - 250000 Sq cm).
Weight (Kilograms):-
- Enter the Weight of the part. (Limit set for the tool : 0.01 Kgs - 1500 Kgs).

D) E-Coat Process Specific Information

Select Coating Process:-
- Select Coating Process from dropdown (Batch or Line).
Derusting / Acid Pickling:-
- Do you wants to add De-rusting Process applies when the part has some Rust on it (Yes / No).