Plasma Cutting Costing Tool

Enter Part Information

View Estimate

Enable Customization (Opt.)

Unlock Premium Costs

Save

Plasma cutting is a precise and efficient metal fabrication technique used primarily for sheet metal and fabricated parts. This process employs a high-temperature plasma arc to swiftly and accurately slice through electrically conductive materials like steel, aluminum, and stainless steel. By focusing a concentrated jet of ionized gas onto the metal surface, plasma cutting achieves clean and smooth cuts, making it an ideal method for creating intricate shapes, holes, and edges in various thicknesses of metal. Its versatility, speed, and minimal heat-affected zone make plasma cutting a favored choice in industries such as manufacturing, automotive, construction for custom parts like sheet metal parts, stamping parts, etc.

A) General Part Information

Part Number:-

- Part Number which is usually mentioned on the drawing. (Alphanumeric values are accepted).

Part Description:-

- Part Name, Wire Trim, Wire Harness Casing, etc. (Alphanumeric values are accepted).

B) Volume (Number of Pieces Produced)

Annual Volume:-

- The Number of Pieces that are Required in a Year. (Limit set for the tool: 1 - 10000000 Nos).

Lot Run Size:-

- The Number of Pieces to be Processed in a Single Setup
(Note: - Suggested value in Input box is Avg. monthly lot run Size. If you want to change simply override this value.) (Limit set for the tool: Less than or equal to Annual volume).

C) Minimum required input

Plasma

Plasma Cutting Costing Tool

Part Number:-

- Part Number which is usually mentioned on the drawing. (Alphanumeric values are accepted).

Part Description:-

- Part Name, Wire Trim, Wire Harness Casing, etc. (Alphanumeric values are accepted).

Annual Volume:-

- The Number of Pieces that are Required in a Year. (Limit set for the tool: 1 - 10000000 Nos).

Lot Run Size:-

- The Number of Pieces to be Processed in a Single Setup
(Note: - Suggested value in Input box is Avg. monthly lot run Size. If you want to change simply override this value.) (Limit set for the tool: Less than or equal to Annual volume).

Material Thickness(In):-

- Enter the thickness of the part.(Limit set for the tool is 0.02 - 2.00 (inch))

Length of Part:-

- Enter the maximum length of the part.(Limit set for the tool is 0.04 - 95.9 (inch))

Width of Part:-

- Enter the maximum width of the part.(Limit set for the tool is 0.04 - 35.9 (inch))

Cut Length:-

- Enter the cutting length of the part.(Limit set for the tool is 0.18 - 400 (inch))

Part Net Weight:-

- Enter the net weight of the part.(Limit set for the tool is 0.1 - 2000 (Lbs.))

Plasma

Plasma Cutting Costing Tool

Part Number:-

- Part Number which is usually mentioned on the drawing. (Alphanumeric values are accepted).

Part Description:-

- Part Name, Wire Trim, Wire Harness Casing, etc. (Alphanumeric values are accepted).

Annual Volume:-

- The Number of Pieces that are Required in a Year. (Limit set for the tool: 1 - 10000000 Nos).

Lot Run Size:-

- The Number of Pieces to be Processed in a Single Setup (Note: - Suggested value in Input box is Avg. monthly lot run Size. If you want to change simply override this value.) (Limit set for the tool: Less than or equal to Annual volume).

Material Thickness(In):-

- Enter the thickness of the part.(Limit set for the tool is 0.02 - 2.00 (inch))

Length of Part:-

- Enter the maximum length of the part.(Limit set for the tool is 0.04 - 95.9 (inch))

Width of Part:-

- Enter the maximum width of the part.(Limit set for the tool is 0.04 - 35.9 (inch))

Cut Length:-

- Enter the cutting length of the part.(Limit set for the tool is 0.18 - 400 (inch))

Part Net Weight:-

- Enter the net weight of the part.(Limit set for the tool is 0.1 - 2000 (Lbs.))

- The Number of Pieces to be Processed in a Single Setup
(Note: - Suggested value in Input box is Avg. monthly lot run Size. If you want to change simply override this value.) (Limit set for the tool: Less than or equal to Annual volume).