PCB Multi-layer manufacturing, a double-sided circuit board is created by laminating a copper layer on both sides of a substrate. It is commonly used to manufacture custom parts from different industries like Consumer Electronics, Computer & IT, Automotive, Industrial electronics, Medical devices, Aerospace & defense, etc. With our advanced PCB multi-layer costing tool and cost estimator, you can conduct a thorough manufacturing cost analysis. Our PCB multi-layer cost optimization tool and pricing calculator provide accurate production cost estimations, allowing you to manage expenses effectively. Get a comprehensive PCB cost breakdown, implement efficient cost management strategies, and utilize our PCB cost control tool for better forecasting and cost control in your PCB production process.

A) General Part Information

Part Number:-

- Part Number which is usually mentioned on the drawing. (Alphanumeric values are accepted).

Manufacturing Location:-

- Select the Location of manufacturing of the part.

- (Pick it from selected dropdowns: USA, CHINA, MEXICO, INDIA, WESTERN EUROPE, EASTERN EUROPE).

Annual Volume:-

- The Number of Pieces that are Required in a Year.

- (Limit set for the tool: 1- 10000000 Nos).

Lot Run Size:-

- The Number of Parts to be Processed in a Single Setup (Less than or equal to Annual volume).

(Note: - Suggested value in Input box is Avg. monthly lot run Size. If you want to change simply override this value.)

B) PCB Information (Primary)

Length of PCB Board (mm) :-

- One of the largest dimensions of the PCB.(Limit set for the tool: 1mm - 650mm)

Width of PCB Board (mm) :-

- One of the shortest dimensions of the PCB. (Limit set for the tool: 1mm - 450mm)

No. of Layers: -

Select no. of layers of PCB. (Pick it from the selected dropdown: 4, 6, 8, 10, 12, 14, 16)

Laminate Board Thickness (mm)

-Default laminate board thickness is given as per the application selected. (User can override the value if needed from the dropdown which is 0.8, 1, 1.2, 1.6, 2, 2.4)

C) PCB Information (Secondary)Application

Application:-

- Select an application from the dropdown list provided below:

1. Automotive: - Automotive applications like headlamps, tail lamps, and dashboards (speedometer).

2. Communication: - (Mobile, Tab, TV, Electronic Gadgets, Laptop etc.)

3. Home Appliances: - (Led Bulb, Refrigerator, Cooler, fan, etc.)

4. Power Electronics: - (Control panel, Micro Controllers, etc.)

5. Security: - (CCTV camera, Fire alarm system, Smoke Detectors, etc.)

6. Others: - (Toys, etc.)

7. Military: - (Radar,Control tower systems, Jamming systems.)

9. Areospace: - (Black Box, Navigation Systems.)

Type of Depanelization:-

- The Default Type of Depanelization is given as per the application selected.

- (User can override the value if needed from the dropdown which is V-Grooving, Tab-Routing)

Panel Length (mm):-

- One of the largest dimensions of the PCB Panel. (Limit set for the tool: 1mm - 660mm).
(User can override the value if needed)

Panel Width (mm):-

- One of the largest dimensions of the PCB Panel. (Limit set for the tool: 1mm -660mm).
(User can override the value if needed)

Temperature Gradient (°C):-

- The Default Temperature Gradient is given as per the application selected.

-(User can override the value if needed from the dropdown which is Normal 130 °C – 140 °C, Medium 150 °C, High >= 170 °C)

Solder Mask Colour:-

- The Default Solder Mask Colour is given as per the application selected.

- (User can override the value if needed from the dropdown which is Green, Red, White, Blue, Yellow, Black)

Silk Screen/Legend Colour:-

- The Default Silk Screen/Legend Colour is given as per the application selected.

- (User can override the value if needed from the dropdown which is Green, Red, White, Yellow, Black)

Type of Surface Finish:-

- The Default Base Copper thickness is given as per the application selected.

- (User can override the value if needed from the dropdown which is Tin-Lead HASL, Lead-Free HASL, ENIG, ENEPIG, ImAg)

Control Impedance:-

- The Default Control Impedance is given as per the application selected.

- (User can override the value if needed from the dropdown which is Required or Not required)

Finish Copper Thickness (Micron):-

- The Default Finish Copper Thickness is given as per the application selected.

Type of Drilling :-

- The Default Type of Drilling is given as per the application selected.
(User can override the value if needed from the dropdown which is Laser, Mechanical, Laser & Mechanical)

# of Laser Holes / PCB (Nos.) :-

- The total number of laser holes / PCB (Nos.) (User can override the value if needed.)

# of Drill Holes / PCB:-

- The Default Dispatch Unit is given as per the applThe total number of drill holes / PCB

PCB Multilayer Costing Tool

Part Number:-

- Part Number which is usually mentioned on the drawing. (Alphanumeric values are accepted).

Manufacturing Location:-

- Select the Location of manufacturing of the part.

- (Pick it from selected dropdowns: USA, CHINA, MEXICO, INDIA, WESTERN EUROPE, EASTERN EUROPE).

Annual Volume:-

- The Number of Pieces that are Required in a Year.

- (Limit set for the tool: 1- 10000000 Nos).

Lot Run Size:-

- The Number of Parts to be Processed in a Single Setup (Less than or equal to Annual volume).

(Note: - Suggested value in Input box is Avg. monthly lot run Size. If you want to change simply override this value.)

Length of PCB Board (mm) :-

- One of the largest dimensions of the PCB.(Limit set for the tool: 1mm - 650mm)

Width of PCB Board (mm) :-

- One of the shortest dimensions of the PCB. (Limit set for the tool: 1mm - 450mm)

No. of Layers: -

Select no. of layers of PCB. (Pick it from the selected dropdown: 4, 6, 8, 10, 12, 14, 16)

Laminate Board Thickness (mm)

-Default laminate board thickness is given as per the application selected. (User can override the value if needed from the dropdown which is 0.8, 1, 1.2, 1.6, 2, 2.4)

Application:-

- Select an application from the dropdown list provided below:

1. Automotive: - Automotive applications like headlamps, tail lamps, and dashboards (speedometer).

2. Communication: - (Mobile, Tab, TV, Electronic Gadgets, Laptop etc.)

3. Home Appliances: - (Led Bulb, Refrigerator, Cooler, fan, etc.)

4. Power Electronics: - (Control panel, Micro Controllers, etc.)

5. Security: - (CCTV camera, Fire alarm system, Smoke Detectors, etc.)

6. Others: - (Toys, etc.)

7. Military: - (Radar,Control tower systems, Jamming systems.)

9. Areospace: - (Black Box, Navigation Systems.)

Type of Depanelization:-

- The Default Type of Depanelization is given as per the application selected.

- (User can override the value if needed from the dropdown which is V-Grooving, Tab-Routing)

Panel Length (mm):-

- One of the largest dimensions of the PCB Panel. (Limit set for the tool: 1mm - 660mm).(User can override the value if needed)

Panel Width (mm):-

- One of the largest dimensions of the PCB Panel. (Limit set for the tool: 1mm -660mm).(User can override the value if needed)

Temperature Gradient (°C):-

- The Default Temperature Gradient is given as per the application selected.

-(User can override the value if needed from the dropdown which is Normal 130 °C – 140 °C, Medium 150 °C, High >= 170 °C)

Solder Mask Colour:-

- The Default Solder Mask Colour is given as per the application selected.

- (User can override the value if needed from the dropdown which is Green, Red, White, Blue, Yellow, Black)

Silk Screen/Legend Colour:-

- The Default Silk Screen/Legend Colour is given as per the application selected.

- (User can override the value if needed from the dropdown which is Green, Red, White, Yellow, Black)

Type of Surface Finish:-

- The Default Base Copper thickness is given as per the application selected.

- (User can override the value if needed from the dropdown which is Tin-Lead HASL, Lead-Free HASL, ENIG, ENEPIG, ImAg)

Control Impedance:-

- The Default Control Impedance is given as per the application selected.

- (User can override the value if needed from the dropdown which is Required or Not required)

Finish Copper Thickness (Micron):-

- The Default Finish Copper Thickness is given as per the application selected.

Type of Drilling :-

- The Default Type of Drilling is given as per the application selected. (User can override the value if needed from the dropdown which is Laser, Mechanical, Laser & Mechanical)

# of Laser Holes / PCB (Nos.) :-

- The total number of laser holes / PCB (Nos.) (User can override the value if needed.)

# of Drill Holes / PCB:-

- The Default Dispatch Unit is given as per the applThe total number of drill holes / PCB

- One of the largest dimensions of the PCB Panel. (Limit set for the tool: 1mm - 660mm).
(User can override the value if needed)

- One of the largest dimensions of the PCB Panel. (Limit set for the tool: 1mm -660mm).
(User can override the value if needed)

- The Default Type of Drilling is given as per the application selected.
(User can override the value if needed from the dropdown which is Laser, Mechanical, Laser & Mechanical)