Plasma Cutting Costing Tool

Enter Part Information

View Estimate

Enable Customization (Opt.)

Unlock Global costs

Save

Plasma cutting is a precise and efficient metal fabrication technique. It is mainly used for sheet metal and processed parts. The process uses high-temperature plasma pressure to quickly and precisely destroy electrically conductive materials such as steel, aluminum, and stainless steel. Plasma cutting focuses a concentrated jet of ionized gas onto a metal surface. Plasma cutting produces clean, smooth cuts. Suitable for creating complex shapes and holes. and edges in metal of various thicknesses. The method is versatility, speed, least heat affected area. And this makes plasma cutting a good choice in industries such as manufacturing, automotive, sheet metal parts.

A) General Part Information

Part Number:-

- Part Number which is usually mentioned on the drawing. (Alphanumeric values are accepted).

Part Description:-

- Part Name, Wire Trim, Wire Harness Casing, etc. (Alphanumeric values are accepted).

B) Volume (Number of Pieces Produced)

Annual Volume:-

- The Number of Pieces that are Required in a Year. (Limit set for the tool: 1 - 10000000 Nos).

Lot Run Size:-

- The Number of Pieces to be Processed in a Single Setup
(Note: - Suggested value in Input box is Avg. monthly lot run Size. If you want to change simply override this value.) (Limit set for the tool: Less than or equal to Annual volume).

C) Minimum required input

Plasma Cutting

Plasma Cutting Costing Tool

Part Number:-

- Part Number which is usually mentioned on the drawing. (Alphanumeric values are accepted).

Part Description:-

- Part Name, Wire Trim, Wire Harness Casing, etc. (Alphanumeric values are accepted).

Annual Volume:-

- The Number of Pieces that are Required in a Year. (Limit set for the tool: 1 - 10000000 Nos).

Lot Run Size:-

- The Number of Pieces to be Processed in a Single Setup
(Note: - Suggested value in Input box is Avg. monthly lot run Size. If you want to change simply override this value.) (Limit set for the tool: Less than or equal to Annual volume).

Material Thickness(In):-

- Enter the thickness of the part.(Limit set for the tool is 0.02 - 2.00 (inch))

Length of Part:-

- Enter the maximum length of the part.(Limit set for the tool is 0.04 - 95.9 (inch))

Width of Part:-

- Enter the maximum width of the part.(Limit set for the tool is 0.04 - 35.9 (inch))

Cut Length:-

- Enter the cutting length of the part.(Limit set for the tool is 0.18 - 400 (inch))

Part Net Weight:-

- Enter the net weight of the part.(Limit set for the tool is 0.1 - 2000 (Lbs.))

Plasma Cutting

Plasma Cutting Costing Tool

Part Number:-

- Part Number which is usually mentioned on the drawing. (Alphanumeric values are accepted).

Part Description:-

- Part Name, Wire Trim, Wire Harness Casing, etc. (Alphanumeric values are accepted).

Annual Volume:-

- The Number of Pieces that are Required in a Year. (Limit set for the tool: 1 - 10000000 Nos).

Lot Run Size:-

- The Number of Pieces to be Processed in a Single Setup (Note: - Suggested value in Input box is Avg. monthly lot run Size. If you want to change simply override this value.) (Limit set for the tool: Less than or equal to Annual volume).

Material Thickness(In):-

- Enter the thickness of the part.(Limit set for the tool is 0.02 - 2.00 (inch))

Length of Part:-

- Enter the maximum length of the part.(Limit set for the tool is 0.04 - 95.9 (inch))

Width of Part:-

- Enter the maximum width of the part.(Limit set for the tool is 0.04 - 35.9 (inch))

Cut Length:-

- Enter the cutting length of the part.(Limit set for the tool is 0.18 - 400 (inch))

Part Net Weight:-

- Enter the net weight of the part.(Limit set for the tool is 0.1 - 2000 (Lbs.))

- The Number of Pieces to be Processed in a Single Setup
(Note: - Suggested value in Input box is Avg. monthly lot run Size. If you want to change simply override this value.) (Limit set for the tool: Less than or equal to Annual volume).